UPVC Pipes

Ashirvad is the pioneer of uPVC Column Pipes, also known as the largest manufacturers and exporters of uPVC Column Pipes in the world.

Today these pipes are being successfully used in erection of Submersible borehole pumps up to depths of 1500 feet. With its unique patented technology of WIRELOCK system, uPVC Column Pipes are the best replacement for GI and HDPE Pipes.

ACCESSORIES

Marked bottom and top adaptors for fitment with Drop / Riser Pipes.

Bottom adaptors are available in cast iron and stainless steel for connecting the bottom pipe with the submersible pump.

Bottom thread of the bottom adaptor and Top thread of the Top adaptor are 11 TPI.

Features

In this unique WIRELOCKTM system, the coupler (1” and above) is fitted to the pipe and locked with special stainless steel wire, thus eliminating the chances of coupler loosening and column slipping during dismantling and / or installation process.
It also prevents excessive tightening of coupler with the pipe. Only Ashirvad has this unique system which is now patented.

The joint of pipes have been specially designed with square threads to ensure proper gripping and no chance of slipping.
These threads are high friction threads on load, which do not open even on constant forward and reverse torque generated by starting and stopping the pump.
All threads are checked thoroughly with fitment gauges to ensure 100% accuracy.

Installation of these pipes becomes very easy due to coupling. The ‘O’ ring, sealant and gripping system provides leak proof fitting and also absorbs the vibrations of the pump.
This results in extended life of motor and pump bearings.

Unique thick and thin construction of pipes: This innovative technique for making pipes thicker at the threading end to compensate for material removal due to threads.
The residual thickness in the end part after removal of thread is the same as barrel thickness, Therefore the pipe strength remains the same.

HDPE Pipes

HDPE Pipes are Low resistance to corrosion, non-toxic and inert to chemicals, low thermal conductivity and high electric resistance.

Availalbe High Density Polyethylene (HDPE) pipes and fittings. Pipe sizes range from 20mm to 500mm with the facilities for fabricating and injection moulding HDPE pipe fittings, Sprinkler and Drip irrigation Equipment.

These pipes are manufactured in raw material grades PE-63 and PE-80 for various applications, like

water supply,
irrigation,
tube wells submersible pumps,
sewerage disposal and
effluent treatment plants etc.

Cables

Flat Cable

3 Core flat submersible cables are specifically manufactured to power submersible pumps which goes deep inside earth surface to power pumps. This specially designed cable is capable to provide eletrical energy to submersible pump installed under water in harsh & hostile conditions

Ranges: 1.5 sq.mm to 35 sq.mm

Armoured Cable In Electrical power distribution, armoured cable usually means steel wire armoured cable(SWA) which is hard-wearing power cable designed for the supply of main electricity. Armouring also applied to submarine communications cable

Ranges: 6 Sq.mm- 185 Sq.mm

2 Core, 3 Core, 3.5 Core, 4 Core